Forklift Training Programs Peoria

Forklift Training Programs Peoria - If you are searching for a job as an operator of a forklift, our regulatory-compliant forklift training programs offer excellent instruction in numerous styles and types of forklifts, lessons on pre-shift inspection, fuel kinds and handling of fuels, and safe use of a forklift. Practical, hands-on training assists individuals participating in acquiring basic operational skills. Program content covers current regulations governing the use of lift trucks. Our proven forklift courses are intended to provide training on these types of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Handle Loads Safely

When the forklift is in operation, do not raise or lower the forks. Loads should not extend over the backrest. This is due to the possibility of the load sliding back towards the operator. Check for overhead obstacles and make certain there is enough clearance before lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it back slightly.

When the load is lifted the lift truck will be less stable. Make sure that no pedestrians cross below the elevated fork. The operator must never leave the lift truck while the load is lifted.

While handling pallets, forks should be level and high enough to go into the pallet and extend all the way below the load. The fork's width must provide equal distribution of weight.

Before unloading or loading the truck, chock the wheels and set the brakes. Floors need to be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed to support a semi-trailer which is not attached to a tractor. The entrance door height should clear the forklift height by at least 5 cm. Edges of ramps, docks and rail cars must be marked and avoid them.

If there is not proper ventilation into the forklift, do not stay in there for extended periods. The trucks interior should have enough lighting and be free of obstructions. Check the flooring of the forklift cab for holes. The installation of material which are non-slip on the floor will help prevent slipping. Clear any obstructions from dockplates and docks and ensure surfaces are not oily or wet.

Lift trucks must not be used to tow or push other forklifts.

Click to Download the pdf