Forklift Training Course Peoria

Forklift Training Course Peoria - CSA and OSHA establish criteria for forklift safety training which meets current regulations and standards. Anyone intending to use a forklift is required to successfully complete safety training prior to making use of whatever type of forklift. The accredited Forklift Operator Training Program is intended to offer trainees with the practical skills and knowledge to become a forklift operator.

Vehicle and Mobile Equipment safety regulations which apply to forklift operation include pre-shift inspections, and rules for lifting and loading.

Prior to a shift beginning, an inspection checklist needs to be completed and submitted to the Supervisor or Instructor. If any maintenance problem is discovered, the equipment should not be used until the issue is dealt with. To be able to indicate the machinery is out of service, the keys should be removed from the ignition and a warning tag placed in a visible place.

Loading safety regulations consist of checking the forklift nameplate's rating capacity and determining if the load weight falls within capacity. The forklift forks should be in the downward position when the forklift is starting up. Bear in mind that there is a loss of approximately 100 pounds carrying capacity for every inch further away from the carriage that the load is carried.

Lifting should start with the driver moving to a stopped position approximately three inches from the load. The mast should then be leveled until it has reached a right angle with the load. Lift the forks to an inch underneath the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to warn other staff. Do not allow forks to drag on the ground.

Forklift loads must be loaded in such a way that they are secure and do not create a danger to other people or objects. Restraining loads is necessary for materials which may shift during transport and destabilize the forklift.

In order to prevent the shifting of drums, drums could be strapped together to reduce movement. Forklift operators must drive slowly when lifting liquids, to decrease instability in the forklift.

Click to Download the pdf